Loadbreak Elbow Connector

Short Description:

Loadbreak Elbow Connector is fully insulated, fully sealed connector, is widely used in outdoor power distribution transformer, American cabinet type

transformer, ring main unit and cable branch box, buried transformers and other electrical equipments. It can be installed on outgoing line of 200AT type connector, 200A busbar, single-pass(Double type) apparatus bushing and load conversion connector of American cabinet type transformer.

Test points can be installed live monitor, in order to check the charged state of the equipment, but also to meet the nuclear phase requirements.

Conductive rod connector arc extinguishing material, it can be charged in the state operation, but can not cut off the short-circuit current; can be used as the load switch to open the current 200A.

Applicable for XLPE cable cross-section 25mm2-400mm2

Send email to us

Product Detail

Product Tags

15kV 200A Loadbreak Elbow Connector is a fully-shielded and insulated plug-in termination for connecting underground cable to distribution power system of pad-mound transformer , surrounding power supply branch box , cable branch box equipped with loadbreak bushings . The elbow connector and bushing insert comprise the essential components of all loadbreak connections. It can meet the demand of lines in nuclear. The Loadbreak Elbows are molded using high quality sulfur-cured insulating and semi- conducting EPDM rubber.Standard features include a coppertop connector, tin-plated copper loadbreak probe with an ablative arc-follower tip and stainless steel reinforced pulling-eye . An optional capacitive test point , made of corrosion resistant plastic , is available for use with fault indicators. The avaible conductor cross section is 35~150mm2 for 15kV cable. The conductive pole W/ARC extinguishes function.

Previous: European Screened Separable T-shaped Elbow Connectors

Next: IP56 GWH Series terminal block waterprrof junction box abs plastic box

European