Products
-
P-72 plastic nfc standard tap insulated piercing ground connector
The JBD insulation piercing connectors are applicable for the low voltage aerial cables. These connectors are used to establish T-connections and Joint-connections. Connection of main line is established by insulation piercing without stripping of insulation. Connection of tap line is established by insert tap conductor into the bore after stripping of insulation. Shear head bolts applied for both connections.
● Equipped with insulating cover which also has excellent waterproof feature
● Standard: EN 50483-4, NFC 33-020
-
CD-71 anti UV aluminum alloy plastic insulated piercing connector
The JBD insulation piercing connectors are applicable for the low voltage aerial cables. These connectors are used to establish T-connections and Joint-connections. Connection of main line is established by insulation piercing without stripping of insulation. Connection of tap line is established by insert tap conductor into the bore after stripping of insulation. Shear head bolts applied for both connections.
● Equipped with insulating cover which also has excellent waterproof feature
● Standard: EN 50483-4, NFC 33-020
-
Heat Shrinkable Breakout
Heat Shrinkable Breakout is used in the branch of cable core for insulation and oil separation sealing protection.
-
two hole long palm barrel copper cable lugs
two hole long palm barrel copper cable lugs are designed for totally air-tight cable applications. The barrels are intemally silver soldered at the palm junction and the inspection window is not present.
The long palm can easily accommodate two bolts, for secure termination. All lugs are standard with blank palm, and stud holes can be punched to order.
-
IP56 GWH Series terminal block waterprrof junction box abs plastic box
Injection molding ABS enclosure,made from new imported material,built in rib reinforcement, whichis well designed, anti distortion,waterproof, dust-proof, andinsulated, with longer service life.
-
Loadbreak Elbow Connector
Loadbreak Elbow Connector is fully insulated, fully sealed connector, is widely used in outdoor power distribution transformer, American cabinet type
transformer, ring main unit and cable branch box, buried transformers and other electrical equipments. It can be installed on outgoing line of 200AT type connector, 200A busbar, single-pass(Double type) apparatus bushing and load conversion connector of American cabinet type transformer.
Test points can be installed live monitor, in order to check the charged state of the equipment, but also to meet the nuclear phase requirements.
Conductive rod connector arc extinguishing material, it can be charged in the state operation, but can not cut off the short-circuit current; can be used as the load switch to open the current 200A.
Applicable for XLPE cable cross-section 25mm2-400mm2
-
European Screened Separable T-shaped Elbow Connectors
Euromold Screened Separable Elbow Connector designed for MV termination of polymeric insulated (XLPE and EPR) medium voltage 6.6kV, 11kV, 15kV, 17.5kV, 22kV cables to equipment bushings including transformers, switchgear, motors. Can also be used to connect cable to cable, using the appropriate mating part.
-
Thin Wall Heat Shrinkable Tubing cable sleeves
The fire resistant heat shrinkable tubing are provided with the function of low-temperature contraction, fiexibility, fire resistance, insulation and corrosion prevention and so on. These are widely used for connecting, marking and strapping the wire and protect the metal tubes, bars and antnna fram rusting and corroding.
· Standard colors: Black, Red, Green, Yellow, Blue, White, Clear
· Special colors are available on request -
Bus-Bar Insulation Heat Shrinkable Tubing Cable Sleeve
High fire resistance: the oxygen indes is more than 30. Fine heat resistance: the operating temperature can reach to 105℃ still can run stably.Fine low-temperature character: the product is not fragile and cracking in the temperature environment of -45℃. Easy installation: the product can be easily contracted on the bus bar only by bake oven or spray gun.
-
automotive fuel line waterproof Insulation Heat Shrinkable Tube cable sleeves
The automotive fuel line waterproof Insulation Heat Shrinkable Tube cable sleeves is composed of radiant cross-linked polyolefin material, with excellent physical and chemical electrical properties. Its main functions are electrical insulation, solder joint, rust prevention,corrosion prevention, mechanical protection and wiring harness. It is widely used in electronic, communication, automobile, ship,and aircraft manufacturing fields.
Heat shrinkability : 2:1
Shrinking temperature: ≥84℃
Final shrinkage temperature: ≥120℃
Operating temperature: -55℃-125℃
Environmental standards: Rohs
Standard color : black. White, red, yellow, green.blue and other can be customized -
35kv 3-Cores Heat Shinkable Cable Termination Kits
For 26/35kV 1 core or 3 cores PVC and XLPE power cable termination kit and straight through joint, with good electrical and mechanical properties.
-
MEDIUM WALL HEAT SHRINKABLE TUBING WITH HOT MELTING ADHESIVE Cable Sleeves
medium wall heat shrinkable tubing with hot meit adhesive, having properties of excellent insulating, environmntal sealing, and resistant to impact and abrasion, it is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required, 3:1 ratio allows it easily over irregular shape and large connectors.
