STL bolt type copper and aluminum equipment clamp
Cu-Al transition terminal connector
| Catalog No. |
Conductor mm2 |
Dimensions(mm) |
||||
|
A |
B | L1 |
L2 |
L |
||
| SL-1 (single hole) | 35〜50 |
40 |
5 | 65 |
42 |
120 |
| SL-2 (single hole) | 70〜95 |
40 |
5 | 80 |
45 |
136 |
| SL-3 (double holes) | 35~50 |
40 |
5 | 65 |
65 |
145 |
| SL-4 (double holes) | 70~95 |
40 |
5 | 80 |
80 |
175 |
| SL-5 (double holes) |
120~150 |
50 |
6 | 125 |
85 |
225 |
| SL-6 (double holes) |
185~240 |
50 |
6 | 125 |
85 |
225 |
| SL-7 (four holes) |
120~150 |
80 |
6 | 125 |
85 |
239 |
| SL-8 (four holes) |
185~240 |
80 |
6 | 125 |
85 |
239 |
(74 Catalog)
Cu-Al transition terminal connector
| Catalog No. | Conductor mm2 | Number of bolt |
Dimensions(mm) | ||||
| A | B | L | L1 | L2 | |||
| SLG-1A/1B | 35~50 | 4 | 40 | 5 | 145 | 65 | 65 |
| SLG-2A/2B | 70~95 | 4 | 40 | 5 | 175 | 80 | 80 |
| SLG-3A/3B | 120~150 | 6 | 50 | 6.3 | 225 | 125 | 85 |
| SLG-4A/4B | 185~240 | 6 | 50 | 6.3 | 225 | 125 | 85 |
The fasterner are hot-dip galvanized steel
Aluminium-Copper Terminal Clamps(Bolted,Group 0°)
| Catalog No. | Conductor mm² | Dimensions (mm) | |||
| a | h | b | L | ||
| SLG-1AQ | 35~50 | 40 | 65 | 6 | 65 |
| SLG-2AQ | 70~95 | 40 | 80 | 6 | 80 |
| SLG-3AQ | 120~150 | 50 | 85 | 8 | 125 |
| SLG-4AQ | 185~240 | 50 | 85 | 8 | 125 |
Note: 1. The additional letter A means horizontal 0°, and B means 30°.
2. Note 1 for the terminal board is recommended for single hole, Note 2 for double holes, and Note 3 for four holes.
3. If the size of the terminal board required by the user is different from that in the table, please specify it separately when ordering.
Product Description
Parallel Groove Connector is used for the Non-bearing connection and offset of aluminum stranded wire, aluminum stranded wire, it’s used with insulating cover for the effect of protective and insulation.
Write your message here and send it to us
