Insulating Piercing Electric-check earthing ring device
10KV High Voltage Two Bolts Best Insulation Piercing Grounded Clamp
Product features
1.Used for branch connection of insulated cable for building distridution system,connection of LV overhead insulated cables, branch connection of LV insulated service-entrance cable.distridution system of streetlight,etc.
2.Mainline: Insulated copper or aluminium
3.Branch line: Insulated copper or aluminium
4.Live-line work or power-cut work is allowable
5.Main body of connector is made of high strength insulating material that anti mechanical change or climatic variation.
6.The screw that is equipped with fastening torque nut is anti-corrosion treated,the torque nut enables the installation to be much simple, safe and quick, its constant puncturing pressure guarantees best electrical effect for the cable connection.
7.The connector is featured with property of waterproof, it is able to withstand voltage of 6KV in water without breakdown phenomenon.
8.The waterproof sealing end cap of branch line prevents water from entering into the branch connected conductor.lt can be branched on the letf or right side according to the demand.
Name | Catalog No. | Applicable bus (mm2) |
Electric-check earthing ring device | JBCD-50-120(10kV) | 10kV JKLYJ 50-120mm2 |
JBCD-150-240(10kV) | 10kV JKLYJ 150-240mm2 | |
JBCD-35-120(lkV) | 1kV JKLYJ 35-120mm2 | |
JBCD-150-240(1kV) | 1kV JKLYJ 150-240mm2 |
Catalog No. | Applicable bus (mm) | Note |
BYD-0 | 50~240 | Small size, with JBL-50-240 two sections (with shell) |
BYD-0 | 50~240 | Small size, with JBL-50-240 three sections (with shell) |
BYD-1 | 50~240 | Medium |
BYD-2 | 120~400 | large |
A clip attached to the wire and the welding rod on the welding torch are short-circuited on the welded metal object, forming a loop through the secondary winding of the welder, so that the welder can weld the metal object.